Leafy
Moderator
I will destroy you.
Posts: 200
|
Post by Leafy on Mar 19, 2009 8:05:30 GMT -5
Ok so I was bored over my spring break and after sniffing a ton of glue while making a clear pvc stick feed I came up with this. materials needed Co2 tank (I used a 20oz cause it had the flat bottom) some sort of on/off asa that only needs a small movement (like this smart parts 1/4 turn that I used) a macro fitting that gets the flow pointed in the right direction (will be different for different on/offs) a piece of macro line a nail or other object to be used as a lever epoxy of some sort (I wanted to use jb weld but I'm missing the "steel") ok put the macro fitting on the on/off and put the macro in it epoxy the lever onto the knob for the on off in a manner that makes it easy to use (depends on the on/off) wait for it to dry then put it on the Co2 tank you're done I did this entirely with spare parts so it was free for me.
|
|