|
Post by goten170 on Jan 22, 2009 21:48:02 GMT -5
guys u haven't used a mini yet, but have traded for one. i should be receiving it tomorrow or saturday. any advice before i air it up PBf Feedback:
|
|
Leafy
Moderator
I will destroy you.
Posts: 200
|
Post by Leafy on Jan 22, 2009 23:34:50 GMT -5
guys u haven't used a mini yet, but have traded for one. i should be receiving it tomorrow or saturday. any advice before i air it up PBf Feedback: I bet theres good info in the stickies.
|
|
|
Post by goten170 on Jan 23, 2009 16:18:22 GMT -5
LMAO, i was looking for a lil more detailed advice... but that will work.
|
|
|
Post by stewey956 on Jan 31, 2009 2:53:44 GMT -5
Careful about setting the pressures, very easy to blow the noid. Make sure to read the manual on how to set it up and go from there.
be sure to zero any pressures out before applying air.
|
|
Leafy
Moderator
I will destroy you.
Posts: 200
|
Post by Leafy on Jan 31, 2009 16:40:55 GMT -5
Careful about setting the pressures, very easy to blow the noid. Make sure to read the manual on how to set it up and go from there. be sure to zero any pressures out before applying air. really PBf Feedback: I thought the minis have the 200 psi pressure relieve that vented if the reg got to be over 200 to save the noid.
|
|
nick
Global Moderator
Posts: 73
|
Post by nick on Feb 3, 2009 15:07:03 GMT -5
drop of oil in the asa, mini asa is a pain, trust me and don't do any insane dives with it, bend my whole frame lol
|
|
|
Post by squirlly on Feb 4, 2009 10:48:00 GMT -5
and don't do any insane dives with it, bend my whole frame lol Ummm So I take it that's not an intential custom -10* rake on the built in reg huh PBf Feedback: Any way of bending it back and using JB Weld or Mighty Puty to at least make it a fully functioning gnarly backup PBf Feedback: -Tim
|
|
Leafy
Moderator
I will destroy you.
Posts: 200
|
Post by Leafy on Feb 4, 2009 11:16:28 GMT -5
and don't do any insane dives with it, bend my whole frame lol Ummm So I take it that's not an intential custom -10* rake on the built in reg huh PBf Feedback: Any way of bending it back and using JB Weld or Mighty Puty to at least make it a fully functioning gnarly backup PBf Feedback: -Tim thats not the reg the board and batt are in there. the reg is a female type and is used as the asa.
|
|
|
Post by squirlly on Feb 4, 2009 12:17:15 GMT -5
oh.
I have never really looked into the minis except when they first came out I asked to hold one at my local proshop and my hands were touching each other and got into each others way so I gave it back and never gave it another thought.
if you can take the frame off (again ZERO mini knowledge) and take the board and batt out, you should be able to heat up the frame and get it back into a relitvaly "stock" position easy, just remember to heat the frame and only tweek it while it's hot, this will prevent any snapage that might want to happen.
-Tim
|
|
Leafy
Moderator
I will destroy you.
Posts: 200
|
Post by Leafy on Feb 4, 2009 16:45:27 GMT -5
oh. I have never really looked into the minis except when they first came out I asked to hold one at my local proshop and my hands were touching each other and got into each others way so I gave it back and never gave it another thought. if you can take the frame off (again ZERO mini knowledge) and take the board and batt out, you should be able to heat up the frame and get it back into a relitvaly "stock" position easy, just remember to heat the frame and only tweek it while it's hot, this will prevent any snapage that might want to happen. -Tim problem is that the trigger uses the Hall Effect to activate on the board so theres on trigger wires I think you need to have it aligned perfectly for the trigger to work all the time. I think the best thing to do would be to go show that to Simon over on the nation and maybe he'll have it fixed for free.
|
|
nick
Global Moderator
Posts: 73
|
Post by nick on Feb 4, 2009 19:37:14 GMT -5
The gun isn't functional I think some wires snapped or something when I broke it, also the on button is unreachable, I sent it back to invert a 2 weeks ago any way and it's already fixed but I still have a leak and the modes aren't changing or anything so I'm going to have to call in again
|
|
|
Post by squirlly on Feb 4, 2009 21:25:51 GMT -5
Sounds like great customer service too bad they are so small... Maybe invert will make a Mini-Max and make it just a bit bigger -Tim
|
|