sully
New Member
Posts: 0
|
Post by sully on Jan 22, 2009 22:19:49 GMT -5
I was wondering, does any one have any ideas how to mod a 3 position car stock into a air through PBf Feedback: Thanks guys
|
|
Leafy
Moderator
I will destroy you.
Posts: 200
|
Post by Leafy on Jan 22, 2009 22:24:29 GMT -5
drill it and run macro/ remote line through it.
|
|
sully
New Member
Posts: 0
|
Post by sully on Jan 22, 2009 22:26:27 GMT -5
Thats actually not a bad idea. Now how would i route the macro PBf Feedback: Or what ever line i use
|
|
Leafy
Moderator
I will destroy you.
Posts: 200
|
Post by Leafy on Jan 22, 2009 23:33:49 GMT -5
Thats actually not a bad idea. Now how would i route the macro PBf Feedback: Or what ever line i use once you drill the route you want to use, um push it through PBf Feedback:
|
|
sully
New Member
Posts: 0
|
Post by sully on Jan 22, 2009 23:37:04 GMT -5
I could always snake it through. I wonder, is there a way to take it apart
|
|
Leafy
Moderator
I will destroy you.
Posts: 200
|
Post by Leafy on Jan 23, 2009 0:03:12 GMT -5
I could always snake it through. I wonder, is there a way to take it apart I dont know theres only about 3 million different 3 pos car stocks, if you count all the different guns. post up some good pics (make sure you use the macro function on your camera) and tell us what gun its from.
|
|
sully
New Member
Posts: 0
|
Post by sully on Jan 23, 2009 0:16:06 GMT -5
Well the stock is for my tippmann 98 custom
|
|
Leafy
Moderator
I will destroy you.
Posts: 200
|
Post by Leafy on Jan 23, 2009 0:17:12 GMT -5
Well the stock is for my tippmann 98 custom good that narrows it down to about 8 different car stocks, what brand PBf Feedback:
|
|
sully
New Member
Posts: 0
|
Post by sully on Jan 23, 2009 0:21:32 GMT -5
tippmann
|
|
Leafy
Moderator
I will destroy you.
Posts: 200
|
Post by Leafy on Jan 23, 2009 0:27:28 GMT -5
ok so it doenst look like theres an easy way to take it apart so I'd say snake it. of course that by going off the small picture on the tippmann website.
|
|
sully
New Member
Posts: 0
|
Post by sully on Jan 23, 2009 0:44:35 GMT -5
Hmm.. There must be away to take it apart.
|
|