|
Post by oldironmudder on Mar 26, 2009 9:35:40 GMT -5
Ok, got some info to share. Took my Alias, 2k2 & Classic LPR plus my Torpedo apart. The Pin Valve & its retainer will swap out between all the above. Took one retainer down the street to the machine shop to check the threading. Called AKA & got their threading, both are the same. So this is a drop in mod. Removing the 2k2, Classic & Torpedo's retainer, all that is needed is a 3/8 socket & extension to reach down in there. The Alias will need an extra thin wall socket or a small flat head screw driver to remove/install. Larry from AKA said be sure to lube the oring on the retainer plus the 2 on the stem. Here are some pics & a video I did a little while ago. Left to Right - Torpedo - Classic - 2k2 - Alias Classic - Alias Video [URL=http://s117.photobucket.com/albums/o54/drunknmudder77/akamod/ PBf Feedback: action=view¤t=akascminfo008.flv] [/URL]
|
|