|
Post by blackstar848 on Jan 22, 2009 0:00:07 GMT -5
you can ul frame any gun at all. it actually isn't hard at all.
the only thing you need to do is make a tray for the frame since the screw holes may not line up. however, if you want to do it right then it would take work due to needing to drill and such.
i recognize that this is pretty vague at first but whoever has any points to make then i will paraphrase and add as well as give credit where it is due so people won't post inane question like from pbn.
|
|
Leafy
Moderator
I will destroy you.
Posts: 200
|
Post by Leafy on Jan 22, 2009 0:04:58 GMT -5
This should be a sub thread in how to I put x frame on y gun. I'll get around to doing it. I'll ask Ri0t if I can use his simple guide.
|
|
|
Post by blackstar848 on Jan 22, 2009 15:47:38 GMT -5
alright do that. any frame will work on any gun... its just the small matter of making a tray.
|
|
|
Post by thebetterone on Jan 24, 2009 12:15:59 GMT -5
I have a UL frame project that is almost done, It will blow your minds when i post it.
|
|
Leafy
Moderator
I will destroy you.
Posts: 200
|
Post by Leafy on Jan 25, 2009 0:47:12 GMT -5
I have a UL frame project that is almost done, It will blow your minds when i post it. Ul'ed spyder... better yet ul'ed 98c (atcuallt I think there are afew of those already.)
|
|
|
Post by blackstar848 on Jan 25, 2009 13:32:38 GMT -5
there are a few ul'd tipmmans.
i have a tippmann project but i will probably never do it. it would take extensive milling and customization but it would be one of a kind... and be capable of major speeds.
|
|
|
Post by blackstar848 on Apr 2, 2009 9:56:41 GMT -5
to add onto previous post, it would be a dual a-5. you know how some people just make a try and put both a-5's together PBf Feedback: i want to mod it to where one of them houses the cyclone feed on the left side. when that happens i would use 2 offset feeds that way i can actually site down the middle unlike all the other a-5's. it would also utilize 2 flatline barrels, and of course it would have a madmann spring kit and polished internals because that thing would be a gas guzzler. but hey, 1 guy with almost 1k rounds could definitely wait in the bushes for a while. i'm thinking about a video i saw from oklahoma d-day. everyone ran out of like 5 u-boats. i would tank 1 boat by myself.
|
|
Leafy
Moderator
I will destroy you.
Posts: 200
|
Post by Leafy on Apr 2, 2009 11:25:05 GMT -5
to add onto previous post, it would be a dual a-5. you know how some people just make a try and put both a-5's together PBf Feedback: i want to mod it to where one of them houses the cyclone feed on the left side. when that happens i would use 2 offset feeds that way i can actually site down the middle unlike all the other a-5's. it would also utilize 2 flatline barrels, and of course it would have a madmann spring kit and polished internals because that thing would be a gas guzzler. but hey, 1 guy with almost 1k rounds could definitely wait in the bushes for a while. i'm thinking about a video i saw from oklahoma d-day. everyone ran out of like 5 u-boats. i would tank 1 boat by myself. besides the flatlines it sounds like a plan.
|
|
|
Post by blackstar848 on Apr 8, 2009 11:28:47 GMT -5
well i would be shooting way far because i couldn't enter a bunker that fast with 10 pounds of stuff in my hands. besides i couldn't reach the u-boats without flatlines. if you got good bore paint then they wouldn't be that bad correct PBf Feedback:
|
|
Leafy
Moderator
I will destroy you.
Posts: 200
|
Post by Leafy on Apr 8, 2009 13:14:00 GMT -5
just use the apex, with the flat line you have to shoot exactly 260 for them to work and have exactly the right pint, the apex will shoot just about anything.
|
|
|
Post by thebetterone on Apr 11, 2009 12:38:02 GMT -5
I have a UL frame project that is almost done, It will blow your minds when i post it. Ul'ed spyder... better yet ul'ed 98c (atcuallt I think there are afew of those already.) Oh its much more exotic than that my friend.
|
|