Post by nick on Feb 3, 2009 15:54:01 GMT -5
This is a sticky to help everyone that has a Marq / Rapper maintain it, use it, and customize it, if you want me to add / edit something post below. This thread will be updated frequently whenever I think something should be added.
Marq Manual:
www.fileden.com/files/2007/7/5/1241961/MARQ%20Manual_LR.pdf
Marq Frenzy 3.0 Board Manual:
www.boblongdirect.com/downloads/frenzy_3.pdf
Website:
www.boblongdirect.com
Marq 6 Specs:
Barrel Thread Type: Autococker
Included Barrel: Bob Long 14” One-piece Tournament Series
Included ASA: Xpress Mount Standard
Intended Propellant: Compressed air or nitrogen only!
Intended Propulsion Speed: 230-300FPS (feet per second)
Inline Regulator Pressure: 220-240psi
LPR Pressure: 75-85psi
Estimated Shot Count: 1100+ shots (factory settings using 68ci 4500psi air source)
board: Frenzy 3.0
4C Eye Compatible: Yes
4C Eye Equipped: No
Estimated Rate of Fire: 28+BPS (4C eye upgrade with board set in ramping mode)
Trigger Activation: Micro switch
Trigger Return: Spring assist
Weight without barrel: 2 LBS 3 OZ
Marq 7 / Rapper specs
Included Barrel: Bob Long 14” One-piece Tournament Series
Included ASA: Xpress Mount Standard
Intended Propellant: Compressed air or nitrogen only!
Intended Propulsion Speed: 230-300FPS (feet per second)
Inline Regulator Pressure: 220-240psi
LPR Pressure: 75-85psi
Estimated Shot Count: 1100+ shots (factory settings using 68ci 4500psi air source)
Motherboard: Frenzy 3.0
4C Eye Compatible: Yes
4C Eye Equipped: No
Estimated Rate of Fire: 28+BPS (4C eye upgrade with board set in ramping mode)
Trigger Activation: Micro switch
Trigger Return: Spring assist
Trigger Adjustment: Pre-travel. Post-travel
Weight without barrel: 2 LBS 1.7 OZ
Reviews
www.pbreview.com/products/search/q/
Maitnence
Lube/Clean:
Eyes
LPR
HPR
Bolt
How do I set my desired BPS
1. Power off board.
2. Set dip switch 3 to the (On) position.
3. Pull and hold trigger while powering on board.
4. When LED turns white release trigger.
5. LED will turn off and then flash current BPS setting.
6. LED will then turn green awaiting your response.
7. Pull trigger to set desired BPS. Example: 13 BPS = 3 trigger pulls.
1 pull = 11 BPS
2 pulls = 12 BPS
3 pulls = 13 BPS
4 pulls = 14 BPS
5 pulls = 15 BPS
6 pulls = 16 BPS
7 pulls = 17 BPS
8 pulls = 18 BPS
9 pulls = 19 BPS
10 pulls = Unlimited BPS
8. LED will flash back the BPS setting you programmed then the board will power itself off.
9. Set dip switch 3 back to the (Off ) position then reboot your board.
How to change marq modes
To change the Marq modes, use dip switch 4 & 5
4 (Off ) 5 (Off ) = Normal semi-automatic mode
4 (Off ) 5 (On) = 3-shot burst mode (activated when 4 BPS is achieved)
4 (On) 5 (Off ) = Ramping mode (activated when 4 BPS is achieved)
4 (On) 5 (On) = Full-automatic mode (activated when 4 BPS is achieved)
Marq Manual:
www.fileden.com/files/2007/7/5/1241961/MARQ%20Manual_LR.pdf
Marq Frenzy 3.0 Board Manual:
www.boblongdirect.com/downloads/frenzy_3.pdf
Website:
www.boblongdirect.com
Marq 6 Specs:
Barrel Thread Type: Autococker
Included Barrel: Bob Long 14” One-piece Tournament Series
Included ASA: Xpress Mount Standard
Intended Propellant: Compressed air or nitrogen only!
Intended Propulsion Speed: 230-300FPS (feet per second)
Inline Regulator Pressure: 220-240psi
LPR Pressure: 75-85psi
Estimated Shot Count: 1100+ shots (factory settings using 68ci 4500psi air source)
board: Frenzy 3.0
4C Eye Compatible: Yes
4C Eye Equipped: No
Estimated Rate of Fire: 28+BPS (4C eye upgrade with board set in ramping mode)
Trigger Activation: Micro switch
Trigger Return: Spring assist
Weight without barrel: 2 LBS 3 OZ
Marq 7 / Rapper specs
Included Barrel: Bob Long 14” One-piece Tournament Series
Included ASA: Xpress Mount Standard
Intended Propellant: Compressed air or nitrogen only!
Intended Propulsion Speed: 230-300FPS (feet per second)
Inline Regulator Pressure: 220-240psi
LPR Pressure: 75-85psi
Estimated Shot Count: 1100+ shots (factory settings using 68ci 4500psi air source)
Motherboard: Frenzy 3.0
4C Eye Compatible: Yes
4C Eye Equipped: No
Estimated Rate of Fire: 28+BPS (4C eye upgrade with board set in ramping mode)
Trigger Activation: Micro switch
Trigger Return: Spring assist
Trigger Adjustment: Pre-travel. Post-travel
Weight without barrel: 2 LBS 1.7 OZ
Reviews
www.pbreview.com/products/search/q/
PBf Feedback:
q=Marq+Maitnence
Lube/Clean:
Eyes
LPR
HPR
Bolt
How do I set my desired BPS
PBf Feedback:
1. Power off board.
2. Set dip switch 3 to the (On) position.
3. Pull and hold trigger while powering on board.
4. When LED turns white release trigger.
5. LED will turn off and then flash current BPS setting.
6. LED will then turn green awaiting your response.
7. Pull trigger to set desired BPS. Example: 13 BPS = 3 trigger pulls.
1 pull = 11 BPS
2 pulls = 12 BPS
3 pulls = 13 BPS
4 pulls = 14 BPS
5 pulls = 15 BPS
6 pulls = 16 BPS
7 pulls = 17 BPS
8 pulls = 18 BPS
9 pulls = 19 BPS
10 pulls = Unlimited BPS
8. LED will flash back the BPS setting you programmed then the board will power itself off.
9. Set dip switch 3 back to the (Off ) position then reboot your board.
How to change marq modes
To change the Marq modes, use dip switch 4 & 5
4 (Off ) 5 (Off ) = Normal semi-automatic mode
4 (Off ) 5 (On) = 3-shot burst mode (activated when 4 BPS is achieved)
4 (On) 5 (Off ) = Ramping mode (activated when 4 BPS is achieved)
4 (On) 5 (On) = Full-automatic mode (activated when 4 BPS is achieved)